PFAFF® Aqua Magic Wide Stabilizer – 20 Inches x 10 Yards
A Soft, Fabric-Like Stabilizer That Dissolves Easily in Water
PFAFF® Aqua Magic is a soft, fabric-like water-soluble stabilizer designed for projects where the stabilizer needs to be completely removed. It dissolves easily in warm to hot water, leaving your finished embroidery soft, flexible and pliable rather than stiff.
Aqua Magic is ideal for free-standing lace, emblems, 3-D appliqué pieces and cutwork. It can also be used as a temporary stiffener by leaving some of the stabilizer in place.
Recommended Uses:
- Free-standing lace
- Embroidered emblems
- 3-D appliqué pieces
- Cutwork designs
- Projects requiring a completely dissolvable stabilizer
- As a temporary stiffener for embroidery
Specifications:
- Width: 20 inches
- Length: 10 yards
- Water-soluble stabilizer
- Soft, fabric-like construction
Instructions:
- Cut away any large pieces of stabilizer after embroidery is complete.
- Submerge the embroidery in plenty of very warm to hot water.
- Move the item continuously in the water to help remove the stabilizer fibers.
- Keep submerged for at least 10 minutes.
- Rinse thoroughly with very warm water. Repeat if necessary for dense stitching or heavier fabrics.
- Place the finished item on a flat surface until completely dry.
For free-standing lace, emblems and 3-D appliqué, hoop one or two layers of Aqua Magic and embroider the design. Use additional layers for dense designs or heavier thread weights.
