Treadle Belt 72" - YK13

Leather Treadle Belt - YK13

Installation: Measure against the old belt then cut to the proper length. Puncture the end of the belt without the metal hook with a small nail approximately 1/4" from the end. Push the metal hook through the hole that you had made on the other side and bend over the hook after the fit is satisfactory.

Measurements:
Length: approximately 72-1/4 inches - (All treadle sewing machine's require less than 68")
Width: 1/4"

Alternate Part Numbers: SEW1392, B111-A

• Length 72-1/4 in
• Width 1/4 in