Treadle Belt 72" - YK13

Leather Treadle Belt, Alphasew #YK13 Details

This treadle belt made by Alphasew will fit onto all treadle sewing machines, no matter what the age might be.

Installation: Measure against the old belt then cut to the proper length. Puncture the end of the belt without the metal hook with a small nail approximately 1/4" from the end. Push the metal hook through the hole that you had made on the other side and bend over the hook after the fit is satisfactory.

Measurements:
Length: approximately 72-1/4 inches - (All treadle sewing machine's require less than 68")
Width: 1/4"

Alternate Part Numbers: SEW1392

• Length 72-1/4 in
• Width 1/4 in